Mimer SoftLine with Sepura Tetra terminals
Through the use of a specially designed version of the Mimer
SoftLine Network Interface, a remote control can be set up for the Sepura
SRG3500 Tetra terminal and its standard control head.
Some customers do not want to use computers at all. They
prefer the standard control head. But in order to have a very long cable
connection between radio and control head they need to go digital. Mimer
SoftLine Sepura will do this for them.
The radio and the control head can be separated by a
standard CAT5 cable of up to 150m or you can use a standard LAN or the Internet to expand the
range even further.
The benefit of remote control is that the radio can be placed in a high up
place in the building and there use a short antenna cable, for low loss.
Perfect for redundancy use, were you might need to use the terminal in direct
mode or to set it up as a gateway repeater.
There are also special installations were copper wire
can't be used. This solution permits you to use fibre cables between radio and
A Sepura Tetra terminal connected via Mimer SoftLine
Sepura to a standard control head.
At the control head side, the standard speaker and
microphone can be used.
The Mimer Network Interface has a built in speaker
amplifier to get the audio level right.
Brochure is available from the