Mimer NetworkRepeater

When your dispatcher central needs to access several radios over the Internet.


For larger dispatch centrals where many local operators need to access several remote devices over the Internet or a WAN.


The NetworkRepeater handles all logon to the remote radios with their respective Network Interfaces. This makes them appear to the system as local radios. Any number of dispatchers can then access each radio without extra network load.


In this way the internet path will not be so heavily loaded as if all users would access all radios one by one, and there is no need for RadioServers.


Technically the connection over the WAN or the Internet is a TCP connection, and the connection in the local LAN is a UDP connection.


This is the right solution for large dispatch centrals with devices spread out and connected over WAN or the internet.


Mimer NetworkRepeater is delivered as Windows software that can be run on most Windows computers or Servers.


Two sizes

The NetworkRepeater comes in two sizes in order to fit both small and large systems. The large version has a limit of 60 connected devices.


The small version "NetworkRepeater LE" is limited to accessing eight devices.


A device can be a radio, phone or intercom network interface.


The number of PC dispatchers is not restricted.




There is an option that uses the NetworkRepeater for intercom between the operators.

Further described on the Intercom page.


Hot Standby

For redundancy reasons you sometimes would like to put in two servers where one is in hot standby mode. This is possible with our special software that will switch over from the Master server to the Standby server if something happens to the Master.


SIP Phone 

There is a planned future option to the NetworkRepeater that will make it possible to be used for connection to IP-phone systems via SIP-protocol. This gives the ability to have virtual phone lines at the operator positions.

Please refer to the Phone Access page.


Download a description on the differences between Mimer RadioServer and Mimer NetworkRepeater.


System with four radios connected over a WAN to a dispatcher central with three operators. The NetworkRepeater connects to the radios and the operator PC connects to the NetworkRepeater.



NetworkRepeater connected to five devices.



Setup program for the NetworkRepeater.